Videos, Publications, IEE Code of Practice, DVD, PAT Testing and 17th Edition Electrical Testing DVD

This video focuses on the importance of safe testing and refers to the requirements of the Electricity at Work Regulations and guidance notes. Using clear diagrams and demonstrations, Robin's video guide to Portable Appliance testing calls on real life situations to explain the correct procedures for PAT testing different classes of appliances and explains how to test and inspect a variety of portable equipment.                           

This new IEE Code of Practice Edition 3 - 2008 has 56 pages more than the previous PAT Testing edition! It provides detailed guidance for Duty Holders, Managers, administrators and those who carry out the inspection and testing of electrical appliances (often known as PAT testing). Information on the law, testing procedures, faults, pass and fail levels, formal visual inspections and combined inspection and testing etc are all included. The new IEE Code of Practice for In-Service Inspection and Testing of Electrical Equipment Edition 3 is available now. Quantity discounts are available. The IEE, is now part of the IET (The Institution of Engineering and Technology).
ISBN 978-0-86341-833-4. Normally £35.00

These electrical plug safety locks are for UK 3 pin plugs, they are highly visible and stop connections to mains supply (Plug Safety Lockout). Easy to fit, just line up with the pins of the plug then push gently down until the plug lock rests on the face of the plug. Then tighten up the lock screw with a small screwdriver and then fit and close the padlock. The unit is vandal resistant and ideal for use on office equipment, power tools, computers, servers etc. Only removable with key. You can also fit to faulty appliances to prevent connection to the electrical supply - ideal for hard to move bigger electrical appliances. Many people use in appliance repair centers to safety lockout appliances they are repairing so that no one inadvertently plugs in appliance, thus reducing the risk of electrocution and shocks in the workplace.

This instructional DVD for 17th Edition Electrical Inspection and testing of new domestic installations includes earth-spike resistance measurement techniques for TT systems. It is an ideal study aid for anyone enrolling on the C&G 2391 (or equivalent) course and excellent refresher on 'Best Practice' for experienced electricians. This Megger 17th edition DVD has been made in conjunction with the NICEIC. The running time is approximate. 50 minutes. This Megger 17th Edition DVD includes:

• Making a start
• The test equipment
• The visual inspection
• Continuity of protective conductors
• Continuity of ring circuit conductors
• Insulation resistance tests
• Polarity
• Earth fault loop impedance
• Prospective fault current test
• Earth loop impedance
• Functional tests
• Earth electrode resistance testing
• Completing the 17th edition test certificates

Finally you also get from us a pocket sized 17th edition reference card. The BS7671-2008 (17th Edition Wiring Regulations) became mandatory from 1st June 2008. Megger DVD100

Using clear diagrams and demonstrations, Robins video guide to the 16th Edition IEE Wiring regulations testing requirements calls on real life situations to explain the correct procedures for insulation and continuity testing, polarity, earth resistance and earth loop testing. Testing of RCD's is also covered. This video focuses on the importance of safe testing electrical installations and refers to the requirements of the regulations and the 16th Edition guidance notes.

A comprehensive look at Part 7 of the 16th Edition IEE Wiring Regulations and the IEE Guidance Note covering Inspection and Testing. This video aims to help electrical contractors, site maintenance staff and training centers. Lasts about 30 minutes.